Valaistuksen ohjaussovitin T (LMA-T)

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and deep red output levels on the ThinkGrow LEDs.

 The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the deep red LEDs.

The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections.

One adaptor could run up to 256 ThinkGrow LEDs.  

 * Convert RJ12 to Water Proof Connector Cable included.

Specification:

Output Voltage:                                0~11.5V

Maximum Current:                            0.2A

Working Environments:                   Temperature 32-122°F, Humidity=90%

Package Dimensions:                     156mm(L) x 83mm(W) x 30mm(H)

G.W. per weight:                              0.05kgs

Package Content:

1 x Lighting Control Adapter T (LMA-T)