Lumatek ATS 300W PRO LED

  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
  • Lumatek ATS 300W PRO LED
525,00 EUR
/ szt.

Helppo tuotepalautus

Osta tuote ja tarkista se omalla ajallasi kotona.
Voit palauttaa tuotteen ilman syytä 14 päiviä.
Näytä lisätiedot
14päiviä palautukseen
Tyytyväisyytesi on meille tärkeää, siksi voit palauttaa tuotteen antamatta syytä 14 päiviä.
Ilman huolia ja murheita
Voit ostaa rauhassa tuotteita ja olla varma että palautusprosessi on yksinkertainen ja helppo.
Helpot palautukset velho
Kaikki palautukset
  • effectiveness: 2.7 µmol / J,
  • PPF: 816 µmol / s,
  • input voltage: 220-240 V, 50-60 Hz,
  • power consumption: 300 W,
  • lighting area: 1 x 1 m,
  • lifetime: 60,000 hours,
  • light distribution: 110 °

 

Now, Lumatek brings you even closer to the perfect LED fixture for tight grow areas, the ATS300W Pro. Get ready to grow, the brightest just got brighter.

The higher specification Lumatek ATS300W Pro LED is a light-weight fixture producing high levels of PPF of 816 µmol/s and a very high efficacy of up to 2.7 µmol/J, covering perfectly up to 1x1m grow areas.

With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek ATS Pro full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide sole-source or supplemental grow lighting for propagation, vegetative and flowering growth periods of indoor-grown crops.

The fixture efficacy will vary depending on the Input Voltage used.

The array of the new ATS Pro range create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts.

For different cultivars, propagation and vegetative growth periods this agile fixture may be dimmed without losing efficiency. The high efficiency and low powered LED configuration reduces the temperature of the LEDs increasing the output and improving light maintenance.

ATS300W PRO Range
The new Pro line of ATS is built using high quality Lumatek controllable drivers and latest generation higher efficiency top bin White, Red & Far Red Diodes.

The upgraded diodes are now more evenly distributed across the whole length of the light bars resulting on a larger and more even light spread and footprint.

Other new features of this line include: New IP65 rating; Clear Glue protection cover technology on the LED bars, resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes and extra corrosion resistance; And new Control capability with the Lumatek Control Panel Plus 2.0.

Full Spectrum
Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption.

Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

Passive cooling
Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

External Control
The ATS Pro fixtures can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

- High Efficacy up to 2.7 µmol/J
- High PPF output for high intensity 816 µmol/s
- High quality Lumatek LED driver
- New Clear Glue protection cover technology on LED bars
- Top bin LEDs
- Balanced full spectrum
- Improved light spread and uniformity
- External control with Lumatek Control Panel Plus 2.0
- Compact design ideal for up to 1m x 1m grow area
- Fully Dimmable
- User friendly Plug & Play Assembling
ITEMS INCLUDED:
- 1 x ATS300W Pro LED Fixture with Driver
- 1 x Power Cable 230V
- 1 x 0-10V Light Dimmer + Velcro
- 2 x Metal Cable Hangers
- 1 x Manual

 

 

Käyttäjien arvostelut
Kysy tätä tuotetta:

Jos kuvaus ei ole riittävä, niin voit kysyä meiltä tuotteesta. Vastaamme niin nopeasti kuin vaan voimme.

Sähköpostisi:
Tämä kenttä on pakollinen tilausta varten.
Kysymykset:
Tämä kenttä on pakollinen tilausta varten.
Kentät merkitty - Tämä kenttä on pakollinen tilausta varten.- ovat vaadittu
Zamknij
Jplayer
### We care about your privacy This page uses cookie files to provide its services in accordance to [Cookies Usage Policy](fin-privacy-and-cookie-notice.html). You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel