Digital pH, EC, PPM, TDS, US, temperatur mätare P150 Pro

  • Digital pH, EC, PPM, TDS, US, temperatur mätare P150 Pro
  • Digital pH, EC, PPM, TDS, US, temperatur mätare P150 Pro
  • Digital pH, EC, PPM, TDS, US, temperatur mätare P150 Pro
  • Digital pH, EC, PPM, TDS, US, temperatur mätare P150 Pro
1 657,00 SEK
/ szt.

Enkel produkt returnerar

Köp en produkt och kontrollera den i din egen tid, hemma.
Du kan returnera produkten utan att ge en orsak inom 14 dagar.
Visa detaljer
14 dagar för en retur
Din tillfredsställelse är väldigt viktig för oss, därför kan du göra en avkastning utan att ge en anledning till det 14 dagar.
No stress and worry
Tack vare integrationen med billiga avkastningar kan du köpa utan stress och vara säker på att returprocessen blir problemfri.
Enkelt returnerar guiden
Alla avkastningar som behandlas av vår butik hanteras i en användarvänlig returguide som ger dig möjlighet att skicka ett returpaket.
  • Mätområde
  • pH: 0.00 ~ 14.00pH
  • EC: 0.00 ~ 19.99
  • Temperature: -50ºC ~ 70ºC
  • Noggrannhet
  • pH: ±0.1pH
  • EC: ±2%F.S
  • pH, EC, PPM, TDS, US, Temp
  • 88 x 40 x 40mm,
  • 80g

The Combo Pen P150 Pro has been improved  with new software features. The major advantage of this model is its analog EC calibration, which means that the calibration solution does not need to have a temperature of exactly 25ºC.

Calibration takes place without any deviations. EC buffer solutions are extremely sensitive to temperature. However, this does not apply to pH. You can easily replace the electrode should it be worn or damaged. This model comes in a robust case, including pH 4.01, pH 7.00, and EC 1413 buffer solutions, allowing you to calibrate the meter later.

The Combo Pen P150 Pro is ideal for measuring the pH, EC, PPM, TDS, US, and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis, and ponds. The user-friendly buttons can be used to effortlessly switch between the parameters. The meter is delivered fully calibrated and includes batteries.

Usage

  • Remove the protective cover.

  • Gently clean the electrode with distilled water and dry it off.

  • Press the On/off button to start the meter.

  • Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display.

  • Press the Temp/CAL button to switch between Celsius and Fahrenheit.

  • Press the pH/EC button to switch between pH and EC.

  • Make sure the meter is in EC mode to switch between EC, US, TDS, and PPM. Press the pH/EC button for at least 5 seconds to switch parameters.

  • Rinse the electrode with water after use and press the On/off button to turn off the meter.

We recommend storing the meter upright with KCI storage solution in the protective cover.




Includes

  • 1 x Combo Pen P150 Pro

  • 1 x Storage box

  • 1 x Buffer solution pH 7.00 50ml

  • 1 x Buffer solution pH 4.01 50ml

  • 1 x Buffer solution 1413 25ml

  • 1 x Screwdriver for calibration

  • 1 x User manual (NL - EN - DE)



 

Användarnas recensioner
Be om denna produkt:

Om denna beskrivning inte är tillräcklig, skicka oss en fråga till den här produkten. Vi kommer att svara så snart som möjligt.

Din email:
Det här fältet krävs för att beställa.
Fråga:
Det här fältet krävs för att beställa.
fält markerade med - Det här fältet krävs för att beställa. - krävs
Zamknij
Jplayer
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel