Enkel produkt returnerar
Du kan returnera produkten utan att ge en orsak inom 14 dagar.
- Mätområde
- pH: 0.00~14.00pH
- TEMP: 0-50.0°C; 32.0-122.0℉
- TDS:0~19990ppm (0~199ppt)
- EC:0~19000uS/cm, (0~199mS/cm)
- S.G. 0.990-1.400
- Noggrannhet
- pH: ±0.03pH
- TEMP: ±1℃
- TDS/EC:±2%F.S
- 130 x 77 x 31mm, 180g.
This digital monitor with built-in WiFi function can be used to measure EC, pH, TDS, salinity, density and temperature of liquids. It allows you to simultaneously display the pH value on one display and any of the rest of the value on another display. It is ideal for swimming pools, hot tubs, ponds, algae, aquariums, hydroponic systems, drinking water measurement, etc. The meter is equipped with two electrodes (one for pH, one for EC, TDS, salinity and water density), one probe with a temperature sensor and AC adapter.
The device has a built-in WiFi module through which it can connect to a mobile phone based on IOS or Android systems.
Data via WiFi is transmitted in real time directly to the phone where it can be collected and saved. You can also set alarms in the event of indications exceeding the set thresholds.
The user-friendly buttons can be used to switch easily between parameters. The meter is shipped fully calibrated.
How does the meter work?
Read the instruction manual carefully.
Take the device out of the enclosed case.
Connect the electrodes to the device and the device itself to the network.
Remove the protective cover from the electrodes.
Clean the electrode with distilled water and dry it.
Place the electrodes in the solution and gently agitate the liquid.
The parameters will appear on the displays.
To connect the device with a mobile phone, it is necessary to install the appropriate application that can be downloaded to the mobile device.
The package contains:
1 x 6 in 1 digital monitor;
1 x AC adapter;
1 x English user manual;
1 x pH electrode;
1 x electrode EC, TDS, salinity, density and temperature;
1 x probe with temperature sensor;
1 x brackets for hanging the device;
