- - Insulation resistance: 100 MΩ at 100 V
- - Temperature Resistance ： 105 ℃
- - Working temperature: -20 ℃ -105 ℃
- - Storage temperature: -25 ℃ -105 ℃
- - IP65
- - RoHS compliant
- The withstand voltage between the wire and the insulator is 800 VAC, 2 mA, test time 60S, no breakdown or leakage current
- Temperature resistance: 80 ℃
- Working temperature: -20 ℃ -105 ℃
- Storage temperature: -25 ℃ -105 ℃
- IP65
- RoHS compliant
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 250
- Lamp Current (A): 3.0
- Rated life (H): 10000
- Initial brightness (lm): 21000
- Luminous Efficiency (lm / W): 84
- PAR (micromoles / s): 323
- Bulb: BT63
- Base: E40
- Light output: 32,000 lumens
- 2000K
- E40 ceramic socket
- 230 V
- Dual Spectrum
- To use only with a 250W ballast
- Suggested area from 60x60cm
- Cable: H05RN-F 2 × 0.5mm with LLT M12 male connector and LLT M12 female connector
- T connector: LLT M12 x 2 male connector and LLT M12 female connector
- Light output: 55,000 lumens
- 2000K
- E40 ceramic socket
- 230 V
- Dual Spectrum
- To use only with a 400W ballast
- Suggested surface from 80x80cm to 100x100cm
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 400
- Lamp Current (A): 4.0
- Rated life (H): 10000
- Initial brightness (lm): 62000
- Luminous efficiency (lm / W): 100
- PAR (micromol / s): 518
- Bulb: BT63
- Base: E40
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 600
- Lamp current (A): 6.2
- Rated life (H): 10000
- Initial brightness (lm): 50000
- Luminous Efficiency (lm / W): 84
- PAR (micromoles / s): 729
- Bulb: TT80
- Base: E40
- Light output: 85,000 lumens
- 2000K
- E40 ceramic socket
- 230 V
- Dual Spectrum
- To use only with a 600W ballast
- Suggested surface from 100x100cm to 120x120cm
- Bulb: T46
- Lamp Power (W): 600W
- Power Voltage (V): 240V 50Hz
- Lamp Current (A): 3.6A
- Rated Hours: 24,000
- CCT: 2000K
- Luminous Flux (lm): 90,000
- PPF (micromol/sec): 1100
- CRI: 20
- Base Designation: E40
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 1000
- Lamp current (A): 9.5
- Rated life (H): 10000
- Initial brightness (lm): 92000
- Luminous Efficiency (lm / W): 92
- PAR (micromol / s): 1430
- Bulb: TT80
- Base: E40
- PPF: 1200 umol/s
- Base: Double Ended
- Operating Wattage: 600W
- Power Voltage: 190V 50Hz
- Lamp Current: 3.6 A
- CRI: 30
- Luminous Flux: 90 000
- Colour Temperature: 2100K
- Rated Life: 24 000
- Light output: 130,000 lumens
- 2000K
- E40 ceramic socket
- 230 V
- Dual Spectrum
- To use only with a 1000W ballast
- Suggested surface from 140x140cm to 180x180cm
- SHINOBI ULTRA 95
- MATERIAL: MIRO®ALUMINIUM
- REFLECTIVITY: 95%
- FOOTPRINT: 1.5mx1.5m
- DIMENSIONS: 84x84x39cm
- LAMPHOLDER: E40
- TURRICAN WHITE
- MATERIAL: WHITE POWDER COATED ALUMINIUM
- REFLECTIVITY: 86%
- FOOTPRINT: 1.5mx1.5m
- DIMENSIONS: 104x104x40cm
- LAMPHOLDER: E40
- light distribution up to 120 x 120 cm.
- The adjustable E40 lamp holder
- 4 m of 3 x 1.5 mm² power cord terminated with an IEC-male connector
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 315
- Lamp Current (A): 3.15
- Rated life (H): 12,000
- Initial Lumens (lm): 38000 (4200K)
- Luminous Efficiency (lm / W): 121 (4200K)
- PAR (micromoles / s): 615 (4200K)
- Bulb: T38
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 315
- Lamp Current (A): 3.15
- Rated life (H): 12,000
- Initial Lumens (lm): 37000 (3100K)
- Luminous Efficiency (lm / W): 118 (3100K)
- PAR (micromoles / s): 5650 (3100K)
- Bulb: T38
- 4-step regulation:
- 150W-175W-250W-SL
- 100% efficiency throughout the life
- Longer life
- Quiet, light, does not heat up
- Higher luminous efficiency of the bulb (up to 27% + 10% SL)
- Soft-dim soft start increases bulb life
- - dedicated to Lumatek 630W CMH and 1000W / 400V DE lamps
- - reflector + socket included
- - HAMER material
- 4-step regulation:
- 250W-250SL-400W-400SL
- 100% efficiency throughout the life
- Longer life
- Quiet, light, does not heat up
- Higher luminous efficiency of the bulb (up to 27% + 10% SL)
- Soft-dim soft start increases bulb life
- TURRICAN MIRO
- MATERIAL: MIRO®ALUMINIUM
- REFLECTIVITY: 95%
- FOOTPRINT: 1.5mx1.5m
- DIMENSIONS: 104x104x40cm
- LAMPHOLDER: E40
- SHINOBI ULTRA 95
- MATERIAL: MIRO®ALUMINIUM
- REFLECTIVITY: 95%
- FOOTPRINT: 1.5mx1.5m
- DIMENSIONS: 84x84x39cm
- LAMPHOLDER: E40
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 630
- Lamp current (A): 3.2
- Rated life (H): 12,000
- Initial Lumens (lm): 72000 (4200K)
- Luminous Efficiency (lm / W): 115 (4200K)
- PAR (micromoles / s): 1200 (4200K)
- Bulb: T32.5
- Mount: K12x30s
- Double Ended bulb
- Supply voltage: 240 V 50 Hz
- Lamp Power (W): 630
- Lamp current (A): 3.2
- Rated life (H): 12,000
- Initial Lumens (lm): 70000 (3100K)
- Luminous Efficiency (lm / W): 112 (3100K)
- PAR (micromoles / s): 1250 (3100K)
- Bulb: T32.5
- Mount: K12x30s
- Double Ended bulb
- Product Code: LUMBC001
- Output power 315W
- Input Voltage 220-240V 50/60Hz
- Input Current (Max) 1.40A
- Input Power 334W
- Power factor 0.98
- Weight 2.5Kg
- Output power: 600W
- Input Voltage: 240V 50/60Hz
- Input Current Max (A): 2.70A
- Input power: 630W
- Dimensions: 310 x 114 x 81mm
- Weight: 2.7 Kg
- Kit includes:
- Cool Tube Reflector 49cm Ø125mm
- Lumatek 250W digital ballast
- Regulation: 150/175/250/275W
- Lumatek HPS 250W DUAL lamp
- Intended for flowering
- Suggested area 60x60cm
- 4-step regulation:
- 400W-400SL-600W-600SL
- 100% efficiency throughout the life
- Longer life
- Quiet, light, does not heat up
- Higher luminous efficiency of the bulb (up to 27% + 10% SL)
- Soft-dim soft start increases bulb life
- PRODUCT CODE: LUMR0008
- MATERIAL: MIRO®ALUMINIUM
- REFLECTIVITY: 98%
- FOOTPRINT: 1.2x1.2m to 1.5x1.5m
- DIMENSIONS: 615x615x220mm
- LAMPHOLDER: Double Ended
- Lamps: Up to 1000W DE
- Installation: Horizontal
- Voltage 240V 50/60Hz
- Input Current Max (A) 3.2A
- Input power 668W
- Output power 630W
- Dimensions 320 x 114 x 81mm
- Weight 3.8 Kg
- Kit includes:
- Cool Tube Reflector 49cm Ø125mm
- Lumatek 400W digital ballast
- Regulation: 250/275/400/440W
- Lumatek HPS 400W DUAL lamp
- Intended for flowering
- Suggested area:
- from 80x80cm to 100x100cm
- Kit includes:
- Lumatek 600W 400V digital ballast
- 400W-400SL-600W-600SL
- Lumatek HPS 600W 400V DUAL lamp
- Longer life
- Quiet, light, does not heat up
- Higher luminous efficiency of the bulb (up to 27% + 10% SL)
- Soft-dim soft start increases bulb life
- Kit includes:
- Reflector 50x43cm
- ETI 1000w power supply
- HPS 1000w lamp
- + necessary accessories
- Intended for flowering
- Suggested area from 120x120cm to 150x150cm
- Kit includes:
- Cool Tube Reflector 49cm Ø125mm
- Lumatek 600W digital ballast
- Regulation: 250/400/600/660W
- Lumatek HPS 600W DUAL lamp
- Intended for flowering
- Suggested area:
- from 100x100cm to 120x120cm
- SIZE L x W x H(mm) 318 x 166 x 96
- INPUT CURRENT MAX (A) 4.70A
- INPUT POWER 1030W
- OUTPUT POWER 1000W
- POWER FACTOR >0.99
- WEIGHT 4.9 Kg
- DIMENSIONS 318
- For use with one or 2 lamps
- 4-step regulation:
- 400W-400SL-600W-600SL
- 100% efficiency throughout the life
- Longer life
- Quiet, light, does not heat up
- Higher luminous efficiency of the bulb (up to 27% + 10% SL)
- Soft-dim soft start increases bulb life
- Kit includes:
- Cool Tube Reflector 49cm Ø150mm
- ETI 1000w power supply
- HPS 1000w lamp
- + necessary accessories
- Intended for flowering
- Suggested area from 120x120cm to 150x150cm
- 4-step regulation:
- 600W-750W-1000W-SL
- 100% efficiency throughout the life
- Longer life
- Quiet, light, does not heat up
- Higher luminous efficiency of the bulb (up to 27% + 10% SL)
- Soft-dim soft start increases bulb life
- Size L x W x H(mm): 318 x 166 x 96
- Weight (Kg): 4.9
- Dimming (W): 600W - 750W - 1000W – Super Lumens (115%)
- Mains Supply Voltage: 240V 50Hz
- Input Input Current Max (A): 5.1
- Input Power (W): 1200
- Output Power (W): 1150
- Kit includes:
- Adjust-A-Wing Avenger Large 1000W + Sreader
- ETI 1000w power supply
- HPS 1000w lamp
- + necessary accessories
- Intended for flowering
- Suggested area from 175x130cm to 220x180cm
- Efficacy: 2.5 µmol / J
- PPF: 508 µmol / s
- Input voltage: 220-240 V, 50-60 Hz
- Power consumption: 205 W
- Lighting area: 0.8 x 0.8 m
- Service life: 60,000 hours
- Light distribution: 110 °
- Model: ATS200
- Power: 200W
- Power consumption: 200W
- Efficiency: 2.3 µmol / J
- PPF: 460 µmol / s
- Area: 0.8 m2
- Weight: 3.9 kg
- Dimensions: 508 x 508 x 86 mm
- LEDs: Lumiled
- Warranty: 3 years
- Kit includes:
- Spudnik 2 aircooled reflector 150mm
- ETI 1000w power supply
- HPS 1000w lamp
- + necessary accessories
- Intended for flowering
- Suggested area from 120x120cm to 150x150cm
- The kit includes:
- Lumatek electronically controlled power supply,
- compact hammertone headlamp
- CMH 315W lamp
- Kit includes:
- Reflector CoolTube Ø150x49cm
- Lumatek 1000W digital ballast
- Regulation: 600/750/1000/SL
- Lumatek HPS 1000W DUAL lamp
- Intended for flowering
- Suggested area: 150x150cm
- Set contains:
- 1 x Lumatek Control Panel.
- 1 x Power Adapter.
- 2 x Temperature sensors - probe / sensor.
- 2 x Control Link cable - 5m each connecting the power supplies with the controller.
- Model: ATS300
- Power: 300W
- Power consumption: 300W
- Efficiency: 2.3 µmol / J
- PPF: 690 µmol / s
- Area: 1 m2
- Weight: 5,2 kg
- Dimensions: 558 x 558 x 86 mm
- LEDs: Lumiled
- Warranty: 3 years
- ITEMS INCLUDED:
- 1 x Lumatek Digital Panel Plus 2.0
- 1 x Power adaptor and cable
- 2 x Temperature sensor 5m cable
- 2 x HID control link cable 5m
- 2 x LED control link cable
- Kit includes:
- Reflector Xtra-Cool V2 Ø150mm
- Lumatek 1000W digital ballast
- Regulation: 600/750/1000/SL
- Lumatek HPS 1000W DUAL lamp
- Intended for flowering
- Suggested area: 150x150cm
- Kit includes:
- Reflector Adjust-A-Wing large
- Lumatek 1000W digital ballast
- Regulation: 600/750/1000/SL
- Lumatek HPS 1000W DUAL lamp
- Intended for flowering
- Suggested area:
- 150x150cm to 220x180cm
- Kit includes:
- Reflector Spudnik Ø150mm
- Lumatek 1000W digital ballast
- Regulation: 600/750/1000/SL
- Lumatek HPS 1000W DUAL lamp
- Intended for flowering
- Suggested area: 150x150cm
- effectiveness: 2.7 µmol / J,
- PPF: 816 µmol / s,
- input voltage: 220-240 V, 50-60 Hz,
- power consumption: 300 W,
- lighting area: 1 x 1 m,
- lifetime: 60,000 hours,
- light distribution: 110 °
- Model: ZEUS600
- Power: 600W
- Power consumption: 600W
- Efficiency: 2.3 µmol / J
- PPF: 1380 µmol / s
- Area: 1,5 m2
- Weight: 13,5 kg
- Dimensions: 1091 x 1182.4 x 51.9 mm
- LEDs: Osram and Lumileds Philips Diodes
- Warranty: 5 years
- Model: ZEUS Compact 465W PRO
- Power: 465W
- Power consumption: 465W
- Efficiency: 2.7 µmol / J
- PPF: 1256 µmol / s
- Area: 1,2 x 1,2 m
- Weight: 11 kg
- Dimensions: 998 x 900 x 51,9 mm
- Warranty: 5 years
- Model: ZEUS 465W PRO 2.9
- Input power: 475 W (± 5%)
- Efficiency: 2.9 µmol / J
- PPF: 1353 µmol / s
- Area: 1.2 x 1.2 m
- Weight: 11 kg
- Dimensions: 998 x 900 x 51.9 mm
- Warranty: 5 years
- Model: ZEUS600Pro
- Input power: 615 W (± 5%)
- Power consumption: 600W
- Efficiency: 2.9 µmol / J
- PPF: 1770 µmol / s
- Area: 1.5 m2
- Weight: 13.5 kg
- Dimensions: 1091 x 1182.4 x 51.9 mm
- LEDs: Osram and Lumileds Philips Diodes
- Warranty: 5 years
- Model: Lumatek LED Zeus 1000W Xtreme PPFD CO2
- Power: 1000W
- Power consumption: 1025W
- Efficiency: 2.9 µmol / J
- PPF: 2925 µmol / s
- Area: 1.5 m2
- Weight: 18kg
- Dimensions: 118.12 x 109.10 x 10.57 cm
- LEDs: Osram and Lumileds Philips Diodes
- Warranty: 5 years
Lumatek
( number of products: 59 )
